Find Me On...

Art Zemon

art@zemon.name

  • Home
  • Browse
  • Search
  1. Aviation
  2. Bede BD-4C

TS-16 Brackets

Building and mounting the TS-16 brackets on the bottom of the anti-servo tab.
Read More
Rebuilt HS-7 ribs with the holes in the correct places.
11 / 11

Rebuilt HS-7 ribs with the holes in the correct places.

2011

  • Planning the TS-16 bracket installation with a cardboard mock-up of the TS-16 and an HS-7 rib in the end of the HS-6 anti-servo tab.
  • Drawings for the TS-16 brackets rubber cemented to a piece of 2x2 angle
  • The TS-16 brackets roughed out and bolted to a 0.44" wide wooden spacer. I will sand all three pieced down to size while bolted together so that both TS-16 brackets are the same shape and size.
  • The finished TS-16 brackets.
  • Fitting the TS-16 brackets to the HS-6 anti-servo tab
  • How the TS-16 and HS-7 fit onto the HS-6 anti-servo tab
  • How the TS-16 and HS-7 fit onto the HS-6 anti-servo tab
  • Messed up HS-7 ribs with the holes too close to the edges
  • Messed up HS-7 ribs with the holes too close to the edges
  • Rebuilt HS-7 ribs with the holes in the correct places.
  • Rebuilt HS-7 ribs with the holes in the correct places.
  • No Comments
  • Photo Sharing
  • About SmugMug
  • Browse Photos
  • Prints & Gifts
  • Terms
  • Privacy
  • Contact
  • Owner Log In
© 2022 SmugMug, Inc.