Find Me On...

Art Zemon

art@zemon.name

  • Home
  • Browse
  • Search
  1. Aviation
  2. Bede BD-4C

Assembling the Anti-Servo Tab

Assembling the anti-servo tab, which goes on the back of the horizontal stabilator. It is constructed from the HS-6 skin, four HS-7 ribs, and two TS-16 brackets.
Read More
My first completed part: the anti-servo tab!
8 / 9

My first completed part: the anti-servo tab!

2011

  • Everything clecoed together
  • Rib clecoed into the end of the anti-servo tab skin
  • Both TS-16 brackets clecoed to the skin. There are two ribs inside, as well, one underneath each bracket. The rod for adjusting the anti-servo tab attaches to these brackets.
  • Both TS-16 brackets clecoed to the skin. There are two ribs inside, as well, one underneath each bracket. The rod for adjusting the anti-servo tab attaches to these brackets.
  • My first parts riveted together! Brackets plus ribs plus anti-servo tab skin.
  • Next part riveted together: a rib in the end of the anti-servo tab.
  • My first completed part: the anti-servo tab!
  • My first completed part: the anti-servo tab!
  • My first completed part: the anti-servo tab!
  • No Comments
  • Photo Sharing
  • About SmugMug
  • Browse Photos
  • Prints & Gifts
  • Terms
  • Privacy
  • Contact
  • Owner Log In
© 2022 SmugMug, Inc.